赵玉园，男，1965年生，博士，教授，1985年、1988年毕业于大连理工大学金属材料专业，分别获学士与硕士学位，1995年毕业于英国牛津大学材料专业，获博士学位。1995-1998年英国伯明翰大学博士后，1998-2022年英国利物浦大学历任讲师、教授、系主任。英国材料学会会士，英国皇家特许工程师，英国材料学会艾弗-詹金斯（Ivor Jenkins）国际奖章获得者。入选国家级海外高层次人才。
主要从事多孔金属、复合泡沫及金属粉末等材料的制备、结构、性能和应用方面的研究。在国内外学术刊物上发表学术论文100余篇，其中SCI索引80篇，授权欧盟发明专利1项、美国发明专利2项、中国发明专利1项，培养博士生18名，硕士生60余名。
研究方向：
多孔金属热交换器的制备及对流传热机理研究
金属复合泡沫材料的制备及抗冲击性能研究
科研获奖情况：
代表性科研成果：
YY Zhao, DX Sun, A novel sintering-dissolution process for manufacturing al foams, Scripta Materialia, 40(2001), 105-110.
YY Zhao, T Fung, LP Zhang, FL Zhang, Lost carbonate sintering process for manufacturing metal foams, Scripta Materialia, 52(2005), 295-298.
YY Zhao, Considerations in designing a centrifugal atomiser for metal powder production, Materials & Design, 27(2006), 745-750.
XF Tao, LP Zhang, YY Zhao, Al matrix syntactic foam fabricated with bimodal ceramic microspheres, Materials and Design, 30(2009), 2732-2736.
XF Tao, YY Zhao, Compressive failure of Al matrix syntactic foams manufactured by melt infiltration, Materials Science and Engineering A, 549(2012), 228-232.
KK Diao, Z Xiao, YY Zhao, Specific surface areas of porous Cu manufactured by lost carbonate sintering: measurements by quantitative stereology and cyclic voltammetry, Materials Chemistry and Physics, 162(2015), 571-579.
K Diao, Y Zhao, Heat transfer performance of sintered Cu microchannels produced by a novel method, International Journal of Heat and Mass Transfer, 139(2019) 537–547.
P Zhu, Z Wu, Y Zhao, Hierarchical porous Cu with high surface area and fluid permeability, Scripta Materialia, 172(2019) 119–124.
C Liang, Y Zhao, Experimental and analytical study on homogeneous and layered Al matrix syntactic foams under impact, International Journal of Impact Engineering, 153(2021) 103861.
在研科研项目：
1.基于高性能涂层与气液相变传热的铝VC散热器关键技术，宁波生久科技有限公司，2024.01-2027.01。
完成的科研项目：（项目名称，项目编号，项目来源，研究周期）
1.Powder manufacturing by transverse induction rotating rod process, NAL/00067/G， The Nuffield Foundation, 2000.01–2002.03.
2.Optimisation ofatomiser rotor design incentrifugal atomisation for powder production,GR/N23011,EPSRC, 2000.08 – 2002.02.
3.High-performance computing for materials research, GR/M92652,HEFCE and the Wellcome Trust, 2000.03.
4.Damping behaviour of aluminium foams, F/00 025/C,The Leverhulme Trust, 2001.11-2002.05.
5.Micro-porous metals for thermal management, TP/8/MAT/6/I/Q1568F,Technology Strategy Board, 2008.02 – 2010.01.
6.Porous aluminium for heat pipe applications, Thermacore Europe Ltd, 2012.06 – 2012.08.
7.To develop LCS porous metals with novel structures for optimum heat exchange performance,ERDF, 2012.10 – 2016.09
8.Selection and preparation of syntactic materials, Green Gecko Ltd, 2014.03 – 2015.01
9.Enhancing heat transfer in porous metals through optimisation of flow resistance, EP/N006550/1, EPSRC, 2015.12 – 2018.07.
10.Manufacture of porous metals, EP/K503952/1, EPSRC, 2016.10 – 2017.03.
11.Creating real value from aluminium smelter waste,ERDF, 2015.09 – 2019.09.
12.Porous metals for biosensor and micro heat exchanger applications, EPSRC, 2018.10 – 2019.03
13.Aqualine – High performance thermoplastic prepregs using Aqueous impregnation, 97982, Innovate UK,2021.05 – 2022.10.
联系方式：电话：13736198271
邮箱：zhaoyuyuan@nbut.edu.cn
